始めましょう

"Buy sell"に関するスクリプトを検索

Bull MountainsAre you a BEAR? Then get out of here! This indicator is only for long movements, its reading is simple and if you use it correctly it will give you very good results, the components are: The highest quality configuration is as follows: It is not necessary that all the components are aligned, the appearance of the upper mountain on the lower mountain is already a good sign, but if you add some seasoning more the soup will be better =) Note: once the position is taken, it is the trader's responsibility to manage it. INSTRUMENTS WITH REAL VOLUME ARE REQUIRED FOR THIS INDICATOR. tip: what would happen if you look for the signal in an upper frame and then look for an input in a lower frame? mmmmm.... tip: play with the 'Length' setting and see what happens Bull a thumbs up please! I wish you many greens !!
Pine Script® インジケーター
Dreadblitzの投稿
13
Buying and Selling Smoothed with HistogramBuying and Selling Smoothed with Histogram Smoothed version with version with a red line representing the selling pressure and a green line which represents the Buying pressure. If the green line is above the red line it would mean that the Buying pressure is more and vice versa. The difference between the two is plotted as a Histogram. This is a cumulative value of the buying and selling pressure and provides a easy visual presentation of the dominating pressure.
Pine Script® インジケーター
ceyhunの投稿
8
Volume Profile Free Ultra SLI (100 Levels Value Area VWAP) - RRBVolume Profile Free Ultra SLI by RagingRocketBull 2019 Version 1.0 This indicator calculates Volume Profile for a given range and shows it as a histogram consisting of 100 horizontal bars. This is basically the MAX SLI version with +50 more Pinescript v4 line objects added as levels. It can also show Point of Control (POC), Developing POC, Value Area/VWAP StdDev High/Low as dynamically moving levels. Free accounts can't access Standard TradingView Volume Profile, hence this indicator. There are several versions: Free Pro, Free MAX SLI, Free Ultra SLI, Free History. This is the Free Ultra SLI version. The Differences are listed below: - Free Pro: 25 levels, +Developing POC, Value Area/VWAP High/Low Levels, Above/Below Area Dimming - Free MAX SLI: 50 levels, 2x SLI modes for Buy/Sell or even higher res 150 levels - Free Ultra SLI: 100 levels, packed to the limit, 2x SLI modes for Buy/Sell or even higher res 300 levels - Free History: auto highest/lowest, historic poc/va levels for each session Features: - High-Res Volume Profile with up to 100 levels (line implementation) - 2x SLI modes for even higher res: 300 levels with 3x vertical SLI, 100 buy/sell levels with 2x horiz SLI - Calculate Volume Profile on full history - POC, Developing POC Levels - Buy/Sell/Total volume modes - Side Cover - Value Area, VAH/VAL dynamic levels - VWAP High/Low dynamic levels with Source, Length, StdDev as params - Show/Hide all levels - Dim Non Value Area Zones - Custom Range with Highlighting - 3 Anchor points for Volume Profile - Flip Levels Horizontally - Adjustable width, offset and spacing of levels - Custom Color for POC/VA/VWAP levels, Transparency for buy/sell levels WARNING: - Compilation Time: 1 min 20 sec Usage: - specify max_level/min_level/spacing (required) - select range (start_bar, range length), confirm with range highlighting - select volume type: Buy/Sell/Total - select mode Value Area/VWAP to show corresponding levels - flip/select anchor point to position the buy/sell levels - use Horiz Buy/Sell SLI mode with 100 or Vertical SLI with 300 levels if needed - use POC/Developing POC/VA/VWAP High/Low as S/R levels. Usually daily values from 1-3 days back are used as levels for the current day. SLI: use SLI modes to extend the functionality of the indicator: - Horiz Buy/Sell 2x SLI lets you view 100 Buy/Sell Levels at the same time - Vertical Max_Vol 3x SLI lets you increase the resolution to 300 levels - you need at least 2 instances of the indicator attached to the same chart for SLI to work 1) Enable Horiz SLI: - attach 2 indicator instances to the chart - make sure all instances have the same min_level/max_level/range/spacing settings - select volume type for each instance: you can have a buy/sell or buy/total or sell/total SLI. Make sure your buy volume instance is the last attached to be displayed on top of sell/total instances without overlapping. - set buy_sell_sli_mode to true for indicator instances with volume_type = buy/sell, for type total this is optional. - this basically tells the script to calculate % lengths based on total volume instead of individual buy/sell volumes and use ext offset for sell levels - Sell Offset is calculated relative to Buy Offset to stack/extend sell after buy. Buy Offset = Zero - Buy Length. Sell Offset = Buy Offset - Sell Length = Zero - Buy Length - Sell Length - there are no master/slave instances in this mode, all indicators are equal, poc/va levels are not affected and can work independently, i.e. one instance can show va levels, another - vwap. 2) Enable Vertical SLI: - attach the first instance and evaluate the full range to roughly determine where is the highest max_vol/poc level i.e. 0..20000, poc is in the bottom half (third, middle etc) or - add more instances and split the full vertical range between them, i.e. set min_level/max_level of each corresponding instance to 0..10000, 10000..20000 etc - make sure all instances have the same range/spacing settings - an instance with a subrange containing the poc level of the full range is now your master instance (bottom half). All other instances are slaves, their levels will be calculated based on the max_vol/poc of the master instance instead of local values - set show_max_vol_sli to true for the master instance. for slave instances this is optional and can be used to check if master/slave max_vol values match and slave can read the master's value. This simply plots the max_vol value - you can also attach all instances and set show_max_vol_sli to true in all of them - the instance with the largest max_vol should become the master Auto/Manual Ext Max_Vol Modes: - for auto vertical max_vol SLI mode set max_vol_sli_src in all slave instances to the max_vol of the master indicator: "VolumeProfileFree_MAX_RRB: Max Volume for Vertical SLI Mode". It can be tricky with 2+ instances - in case auto SLI mode doesn't work - assign max_vol_sli_ext in all slave instances the max_vol value of the master indicator manually and repeat on each change - manual override max_vol_sli_ext has higher priority than auto max_vol_sli_src when both values are assigned, when they are 0 and close respectively - SLI is disabled - master/slave max_vol values must match on each bar at all times to maintain proper level scale, otherwise slave's levels will look larger than they should relative to the master's levels. - Max_vol (red) is the last param in the long list of indicator outputs - the only true max_vol/poc in this SLI mode is the master's max_vol/poc. All poc/va levels in slaves will be irrelevant and are disabled automatically. Slaves can only show VWAP levels. - VA Levels of the master instance in this SLI mode are calculated based on the subrange, not the whole range and may be inaccurate. Cross check with the full range. WARNING! - auto mode max_vol_sli_src is experimental and may not work as expected - you can only assign auto mode max_vol_sli_src = max_vol once due to some bug with unhandled exception/buffer overflow in Tradingview. Seems that you can clear the value only by removing the indicator instance - sometimes you may see a "study in error state" error when attempting to set it back to close. Remove indicator/Reload chart and start from scratch - volume profile may not finish to redraw and freeze in an ugly shape after an UI parameter change when max_vol_sli_src is assigned a max_vol value. Assign it to close - VP should redraw properly, but it may not clear the assigned max_vol value - you can't seem to be able to assign a proper auto max_vol value to the 3rd slave instance - 2x Vertical SLI works and tested in both auto/manual, 3x SLI - only manual seems to work (you can have a mixed mode: 2nd instance - auto, 3rd - manual) Notes: - This code uses Pinescript v3 compatibility framework - This code is 20x-30x faster (main for cycle is removed) especially on lower tfs with long history - only 4-5 sec load/redraw time vs 30-60 sec of the old Pro versions - Instead of repeatedly calculating the total sum of volumes for the whole range on each bar, vol sums are now increased on each bar and passed to the next in the range making it a per range vs per bar calculation that reduces time dramatically - 100 levels consist of 50 main plot levels and 50 line objects used as alternate levels, differences are: - line objects are always shown on top of other objects, such as plot levels, zero line and side cover, it's not possible to cover/move them below. - all line objects have variable lengths, use actual x,y coords and don't need side cover, while all plot levels have a fixed length of 100 bars, use offset and require cover. - all key properties of line objects, such as x,y coords, color can be modified, objects can be moved/deleted, while this is not possible for static plot levels. - large width values cause line objects to expand only up/down from center while their length remains the same and stays within the level's start/end points similar to an area style. - large width values make plot levels expand in all directions (both h/v), beyond level start/end points, sometimes overlapping zero line, making them an inaccurate % length representation, as opposed to line objects/plot levels with area style. - large width values translate into different widths on screen for line objects and plot levels. - you can't compensate for this unwanted horiz width expansion of plot levels because width uses its own units, that don't translate into bars/pixels. - line objects are visible only when num_levels > 50, plot levels are used otherwise - Since line objects are lines, plot levels also use style line because other style implementations will break the symmetry/spacing between levels. - if you don't see a volume profile check range settings: min_level/max_level and spacing, set spacing to 0 (or adjust accordingly based on the symbol's precision, i.e. 0.00001) - you can view either of Buy/Sell/Total volumes, but you can't display Buy/Sell levels at the same time using a single instance (this would 2x reduce the number of levels). Use 2 indicator instances in horiz buy/sell sli mode for that. - Volume Profile/Value Area are calculated for a given range and updated on each bar. Each level has a fixed length. Offsets control visible level parts. Side Cover hides the invisible parts. - Custom Color for POC/VA/VWAP levels - UI Style color/transparency can only change shape's color and doesn't affect textcolor, hence this additional option - Custom Width - UI Style supports only width <= 4, hence this additional option - POC is visible in both modes. In VWAP mode Developing POC becomes VWAP, VA High and Low => VWAP High and Low correspondingly to minimize the number of plot outputs - You can't change buy/sell level colors from input (only transparency) - this requires 2x plot outputs => 2x reduces the number of levels to fit the max 64 limit. That's why 2 additional plots are used to dim the non Value Area zones - You can change level transparency of line objects. Due to Pinescript limitations, only discrete values are supported. - Inverse transp correlation creates the necessary illusion of "covered" line objects, although they are shown on top of the cover all the time - If custom lines_transp is set the illusion will break because transp range can't be skewed easily (i.e. transp 0..100 is always mapped to 100..0 and can't be mapped to 50..0) - transparency can applied to lines dynamically but nva top zone can't be completely removed because plot/mixed type of levels are still used when num_levels < 50 and require cover - transparency can't be applied to plot levels dynamically from script this can be done only once from UI, and you can't change plot color for the past length bars - All buy/sell volume lengths are calculated as % of a fixed base width = 100 bars (100%). You can't set show_last from input to change it - Range selection/Anchoring is not accurate on charts with time gaps since you can only anchor from a point in the future and measure distance in time periods, not actual bars, and there's no way of knowing the number of future gaps in advance. - Adjust Width for Log Scale mode now also works on high precision charts with small prices (i.e. 0.00001) - in Adjust Width for Log Scale mode Level1 width extremes can be capped using max deviation (when level1 = 0, shift = 0 width becomes infinite) - There's no such thing as buy/sell volume, there's just volume, but for the purposes of the Volume Profile method, assume: bull candle = buy volume, bear candle = sell volume P.S. I am your grandfather, Luke! Now, join the Dark Side in your father's steps or be destroyed! Once more the Sith will rule the Galaxy, and we shall have peace...
Pine Script® インジケーター
RagingRocketBullの投稿
112
Volume Profile Free MAX SLI (50 Levels Value Area VWAP) by RRBVolume Profile Free MAX SLI by RagingRocketBull 2019 Version 1.0 All available Volume Profile Free MAX SLI versions are listed below (They are very similar and I don't want to publish them as separate indicators): ver 1.0: style columns implementation ver 2.0: style histogram implementation ver 3.0: style line implementation This indicator calculates Volume Profile for a given range and shows it as a histogram consisting of 50 horizontal bars. It can also show Point of Control (POC), Developing POC, Value Area/VWAP StdDev High/Low as dynamically moving levels. Free accounts can't access Standard TradingView Volume Profile, hence this indicator. There are several versions: Free Pro, Free MAX SLI, Free History. This is the Free MAX SLI version. The Differences are listed below: - Free Pro: 25 levels, +Developing POC, Value Area/VWAP High/Low Levels, Above/Below Area Dimming - Free MAX SLI: 50 levels, packed to the limit, 2x SLI modes for Buy/Sell or even higher res 150 levels - Free History: auto highest/lowest, historic poc/va levels for each session Features: - High-Res Volume Profile with up to 50 levels (3 implementations) - 20-30x faster than the old Pro versions especially on lower tfs with long history - 2x SLI modes for even higher res: 150 levels with 3x vertical SLI, 50 buy/sell levels with 2x horiz SLI - Calculate Volume Profile on full history - POC, Developing POC Levels - Buy/Sell/Total volume modes - Side Cover - Value Area, VAH/VAL dynamic levels - VWAP High/Low dynamic levels with Source, Length, StdDev as params - Show/Hide all levels - Dim Non Value Area Zones - Custom Range with Highlighting - 3 Anchor points for Volume Profile - Flip Levels Horizontally - Adjustable width, offset and spacing of levels - Custom Color for POC/VA/VWAP levels and Transparency for buy/sell levels Usage: - specify max_level/min_level/spacing (required) - select range (start_bar, range length), confirm with range highlighting - select volume type: Buy/Sell/Total - select mode Value Area/VWAP to show corresponding levels - flip/select anchor point to position the buy/sell levels - use Horiz SLI mode for 50 Buy/Sell or Vertical SLI for 150 levels if needed - use POC/Developing POC/VA/VWAP High/Low as S/R levels. Usually daily values from 1-3 days back are used as levels for the current day. SLI: - use SLI modes to extend the functionality of the indicator: - Horiz Buy/Sell 2x SLI lets you view 50 Buy/Sell Levels at the same time - Vertical Max_Vol 3x SLI lets you increase the resolution to 150 levels - you need at least 2 instances of the indicator attached to the same chart for SLI to work 1) Enable Horiz SLI: - attach 2 indicator instances to the chart - make sure all instances have the same min_level/max_level/range/spacing settings - select volume type for each instance: you can have a buy/sell or buy/total or sell/total SLI. Make sure your buy volume instance is the last attached to be displayed on top of sell/total instances without overlapping. - set buy_sell_sli_mode to true for indicator instances with volume_type = buy/sell, for type total this is optional. - this basically tells the script to calculate % lengths based on total volume instead of individual buy/sell volumes and use ext offset for sell levels - Sell Offset is calculated relative to Buy Offset to stack/extend sell after buy. Buy Offset = Zero - Buy Length. Sell Offset = Buy Offset - Sell Length = Zero - Buy Length - Sell Length - there are no master/slave instances in this mode, all indicators are equal, poc/va levels are not affected and can work independently, i.e. one instance can show va levels, another - vwap. 2) Enable Vertical SLI: - attach the first instance and evaluate the full range to roughly determine where is the highest max_vol/poc level i.e. 0..20000, poc is in the bottom half (third, middle etc) or - add more instances and split the full vertical range between them, i.e. set min_level/max_level of each corresponding instance to 0..10000, 10000..20000 etc - make sure all instances have the same range/spacing settings - an instance with a subrange containing the poc level of the full range is now your master instance (bottom half). All other instances are slaves, their levels will be calculated based on the max_vol/poc of the master instance instead of local values - set show_max_vol_sli to true for the master instance. for slave instances this is optional and can be used to check if master/slave max_vol values match and slave can read the master's value. This simply plots the max_vol value - you can also attach all instances and set show_max_vol_sli to true in all of them - the instance with the largest max_vol should become the master Auto/Manual Ext Max_Vol Modes: - for auto vertical max_vol SLI mode set max_vol_sli_src in all slave instances to the max_vol of the master indicator: "VolumeProfileFree_MAX_RRB: Max Volume for Vertical SLI Mode". It can be tricky with 2+ instances - in case auto SLI mode doesn't work - assign max_vol_sli_ext in all slave instances the max_vol value of the master indicator manually and repeat on each change - manual override max_vol_sli_ext has higher priority than auto max_vol_sli_src when both values are assigned, when they are 0 and close respectively - SLI is disabled - master/slave max_vol values must match on each bar at all times to maintain proper level scale, otherwise slave's levels will look larger than they should relative to the master's levels. - Max_vol (red) is the last param in the long list of indicator outputs - the only true max_vol/poc in this SLI mode is the master's max_vol/poc. All poc/va levels in slaves will be irrelevant and are disabled automatically. Slaves can only show VWAP levels. - VA Levels of the master instance in this SLI mode are calculated based on the subrange, not the whole range. Cross check with the full range. WARNING! - auto mode max_vol_sli_src is experimental and may not work as expected - you can only assign auto mode max_vol_sli_src = max_vol once due to some bug with unhandled exception/buffer overflow in Tradingview. Seems that you can clear the value only by removing the indicator instance - sometimes you may see a "study in error state" error when attempting to set it back to close. Remove indicator/Reload chart and start from scratch - volume profile may not finish to redraw and freeze in an ugly shape after an UI parameter change when max_vol_sli_src is assigned a max_vol value. Assign it to close - VP should redraw properly, but it may not clear the assigned max_vol value - you can't seem to be able to assign a proper auto max_vol value to the 3rd slave instance - 2x Vertical SLI works and tested in both auto/manual, 3x SLI - only manual seems to work Notes: - This code is 20x-30x faster (main for cycle is removed) especially on lower tfs with long history - only 2-3 sec load/redraw time vs 30-60 sec of the old Pro versions - Instead of repeatedly calculating the total sum of volumes for the whole range on each bar, vol sums are now increased on each bar and passed to the next in the range making it a per range vs per bar calculation that reduces time dramatically - hist_base for levels still results is ugly redraw - if you don't see a volume profile check range settings: min_level/max_level and spacing, set spacing to 0 (or adjust accordingly based on the symbol's precision, i.e. 0.00001) - you can view either of Buy/Sell/Total volumes, but you can't display Buy/Sell levels at the same time using a single instance (this would 2x reduce the number of levels). Use 2 indicator instances in horiz buy/sell sli mode for that. - Volume Profile/Value Area are calculated for a given range and updated on each bar. Each level has a fixed length. Offsets control visible level parts. Side Cover hides the invisible parts. - Custom Color for POC/VA/VWAP levels - UI Style color/transparency can only change shape's color and doesn't affect textcolor, hence this additional option - Custom Width - UI Style supports only width <= 4, hence this additional option - POC is visible in both modes. In VWAP mode Developing POC becomes VWAP, VA High and Low => VWAP High and Low correspondingly to minimize the number of plot outputs - You can't change buy/sell level colors from input (only plot transparency) - this requires 2x plot outputs => 2x reduces the number of levels to fit the max 64 limit. That's why 2 additional plots are used to dim the non Value Area zones - All buy/sell volume lengths are calculated as % of a fixed base width = 100 bars (100%). You can't set show_last from input to change it - There's no such thing as buy/sell volume, there's just volume, but for the purposes of the Volume Profile method, assume: bull candle = buy volume, bear candle = sell volume P.S. Gravitonium Levels Are Increasing. Unobtainium is nowhere to be found! Links on Volume Profile and Value Area calculation and usage: www.tradingview.com stockcharts.com onlinelibrary.wiley.com
Pine Script® インジケーター
RagingRocketBullの投稿
25
Volume Profile Free Pro (25 Levels Value Area VWAP) by RRBVolume Profile Free Pro by RagingRocketBull 2019 Version 1.0 All available Volume Profile Free Pro versions are listed below (They are very similar and I don't want to publish them as separate indicators): ver 1.0: style columns implementation ver 2.0: style histogram implementation ver 3.0: style line implementation This indicator calculates Volume Profile for a given range and shows it as a histogram consisting of 25 horizontal bars. It can also show Point of Control (POC), Developing POC, Value Area/VWAP StdDev High/Low as dynamically moving levels. Free accounts can't access Standard TradingView Volume Profile, hence this indicator. There are 3 basic methods to calculate the Value Area for a session. - original method developed by Steidlmayr (calculated around POC) - classical method using StdDev (calculated around the mean VWAP) - another method based on the mean absolute deviation (calculated around the median) POC is a high volume node and can be used as support/resistance. But when far from the day's average price it may not be as good a trend filter as the other methods. The 80% Rule: When the market opens above/below the Value Area and then returns/stays back inside for 2 consecutive 30min periods it has 80% chance of filling VA (like a gap). There are several versions: Free, Free Pro, Free MAX. This is the Free Pro version. The Differences are listed below: - Free: 30 levels, Buy/Sell/Total Volume Profile views, POC - Free Pro: 25 levels, +Developing POC, Value Area/VWAP High/Low Levels, Above/Below Area Dimming - Free MAX: 50 levels, packed to the limit Features: - Volume Profile with up to 25 levels (3 implementations) - POC, Developing POC Levels - Buy/Sell/Total/Side by Side View modes - Side Cover - Value Area, VAH/VAL dynamic levels - VWAP High/Low dynamic levels with Source, Length, StdDev as params - Show/Hide all levels - Dim Non Value Area Zones - Custom Range with Highlighting - 3 Anchor points for Volume Profile - Flip Levels Horizontally - Adjustable width, offset and spacing of levels - Custom Color for POC/VA/VWAP levels and Transparency for buy/sell levels Usage: - specify max_level/min_level for a range (required in ver 1.0/2.0, auto/optional in ver 3.0 = set to highest/lowest) - select range (start_bar, range length), confirm with range highlighting - select mode Value Area or VWAP to show corresponding levels. - flip/select anchor point to position the buy/sell levels, adjust width and spacing as needed - select Buy/Sell/Total/Side by Side view mode - use POC/Developing POC/VA/VWAP High/Low as S/R levels. Usually daily values from 1-3 days back are used as levels for the current day. - Green - buy volume of a specific price level in a range, Red - sell volume. Green + Red = Total volume of a price level in a range There's no native support for vertical histograms in Pinescript (with price axis as base) Basically, there are 4 ways to plot a series of horizontal bars stacked on top of each other: 1. plotshape style labeldown (ver 0 prototype discarded) - you can have a set of fixed width/height text labels consisting of a series of underscores and moving dynamically as levels. Level offset controls visible length. - you can move levels and scale the base width of the volume profile histogram dynamically - you can calculate the highest/lowest range values automatically. max_level/min_level inputs are optional - you can't fill the gaps between levels/adjust/extend width, height - this results in a half baked volume profile and looks ugly - fixed text level height doesn't adjust and looks bad on a log scale - fixed font width also doesn't scale and can't be properly aligned with bars when zooming 2. plot style columns + hist_base (ver 1.0) - you can plot long horizontal bars using a series of small adjacent vertical columns with level offsets controlling visible length. - you can't hide/move levels of the volume profile histogram dynamically on each bar, they must be plotted at all times regardless - you can't delete the history of a plot. - you can't scale the base width of the volume profile histogram dynamically, can't set show_last from input, must use a preset fixed width for each level - hist_base can only be a static const expression, can't be assigned highest/lowest range values automatically - you have to specify max_level/min_level manually from input - you can't control spacing between columns - there's an equalizer bar effect when you zoom in, and solid bars when you zoom out - using hist_base for levels results in ugly load/redraw times - give it 3-5 sec to finalize its shape after each UI param change - level top can be properly aligned with another level's bottom producing a clean good looking histogram - columns are properly aligned with bars automatically 3. plot style histogram + hist_base (ver 2.0) - you can plot long horizontal bars using a series of small vertical bars (horizontal histogram) instead of columns. - you can control the width of each histogram bar comprising a level (spacing/horiz density). Large enough width will cause bar overlapping and give level a "solid" look regardless of zoom - you can only set width <= 4 in UI Style - custom textbox input is provided for larger values. You can set width and plot transparency from input - this method still uses hist_base and inherits other limitations of ver 2.0 4. plot style lines (ver 3.0) - you can also plot long horizontal bars using lines with level offsets controlling visible length. - lines don't need hist_base - fast and smooth redraw times - you can calculate the highest/lowest range values automatically. max_level/min_level inputs are optional - level top can't be properly aligned with another level's bottom and have a proper spacing because line width uses its own units and doesn't scale - fixed line width of a level (vertical thickness) doesn't scale and looks bad on log (level overlapping) - you can only set width <= 4 in UI Style, a custom textbox input is provided for larger values. You can set width and plot transparency from input Notes: - hist_base for levels results in ugly load/redraw times - give it 3-5 sec to finalize its shape after each UI param change - indicator is slow on TFs with long history 10000+ bars - Volume Profile/Value Area are calculated for a given range and updated on each bar. Each level has a fixed width. Offsets control visible level parts. Side Cover hides the invisible parts. - Custom Color for POC/VA/VWAP levels - UI Style color/transparency can only change shape's color and doesn't affect textcolor, hence this additional option - Custom Widh for levels - UI Style supports only width <= 4, hence this additional option - POC is visible in both modes. In VWAP mode Developing POC becomes VWAP, VA High and Low => VWAP High and Low correspondingly to minimize the number of plot outputs - You can't change buy/sell level colors (only plot transparency) - this requires 2x plot outputs exceeding max 64 limit. That's why 2 additional plots are used to dim the non Value Area zones - Use Side by Side view to compare buy and sell volumes between each other: base width = max(total_buy_vol, total_sell_vol) - All buy/sell volume lengths are calculated as % of a fixed base width = 100 bars (100%). You can't set show_last from input - Sell Offset is calculated relative to Buy Offset to stack/extend sell on top of buy. Buy Offset = Zero - Buy Length. Sell Offset = Buy Offset - Sell Length = Zero - Buy Length - Sell Length - If you see "loop too long error" - change some values in UI and it will recalculate - no need to refresh the chart - There's no such thing as buy/sell volume, there's just volume, but for the purposes of the Volume Profile method, assume: bull candle = buy volume, bear candle = sell volume - Volume Profile Range is limited to 5000 bars for free accounts P.S. Cantaloupia Will be Free! Links on Volume Profile and Value Area calculation and usage: www.tradingview.com stockcharts.com onlinelibrary.wiley.com
Pine Script® インジケーター
RagingRocketBullの投稿
33
Crypto Cradle Trade AssistantThis indicator compliments the Crypto Cradle indicator by providing your entry, stop, 1:1 scale-out price, trade amount, and potential profit based on your target and scale-out strategy. 1. Ensure you have added the Crypto Cradle and Crypto Cradle Trade Assistant indicators to your chart 2. Click the cog icon to configure this indicator 3. Enter in your account balance and the % you are willing to risk on this trade (default: 1%). 3. Set your target price 4. Tweak the Trade Pair and Precision (Decimals) if required (USD/USDT only BTC & ETH coming soon) 5. Click on the 'Data Window' icon on the right-hand side of the screen and scroll down to CCTA 6. Hover over a highlighted crypto cradle candle (green for long, red for short) and a series of values will appear Entry price Stop price 1:1 scale out price Amount to buy/sell (ie NEO) Amount in traded currency (ie USD) Target price (that you set) Profit based on selling 50% of your bought amount when your reward equals your risk (1:1 scale-out) Profit based on risking 1% of your portfolio For more about the Crypto Cradle strategy, visit www.tradercobb.com
Pine Script® インジケーター
sydneyshanの投稿
Volume Based Price ActionThis indicator is uses volume and common candlestick patterns to suggest potential trend reversals. It is not quite meant to be used as a buy/sell signal. Instead, it should be used to evaluate market psychology based on when the buyers or sellers fully dominated the price action. In the current version, the indicators looks for engulfing and pin-bar patterns. Optionally, it also considers rising volume as further confirmation to the signal. In future, I plan on allowing it to track more candlestick patterns. Please let me know if you have any suggestions, concerns, or comments!
Pine Script® インジケーター
Zeenobitの投稿
5
Candlestick Trend Indicator v0.5 by JustUncleLRequested Update to this Indicator alert project. In this update I have added the option to be able select which Price Action candles you want included in the display and the generated alarm Alert. Other changes also included in this update: Also added a Price Action candle for "Last Fractal S/R Break", this also a good continuation indication. Added option to select a different moving average types for directional MA line. Modified some default settings, using HullMA instead of Zero Lag EMA and standard MACD settings(12,26,9). Description: This is a trend following indicator and alert for Binary Options based on Candlestick patterns and trend line - NOTE: original system was a forex trading system. This code combines a number of indicators to create an overall trading strategy. The indicator recognises and displays some useful candle named defined patterns that are used to support trend continuation: Bearish + Bullish PinBars Dark Cloud Cover Piecing Line Bullish + Bearish Harami Bullish + Bearish Engulfing Candle Bullish + Bearish Last Fractal S/R break Also recognises main Price Action candles from ChrisMoody (CM), the four(4) price action patterns are colored coded bars: Yellow = Inside Bar - breakout/continuance Orange = Outside Bar - breakout/continuance Aqua/Fuschia = Up/Down Shaved Bars - Buying/Selling pressure Red/Green = Possible reversal PinBars - Reverse Down / reverse Up The highlighted candles (maroon and darker green) represent the defined PA patterns that have been confirmed following the current trend direction that is indicated by the Hull MA(20) line (can select a different type of MA, or even disable) and confirmed by MACD direction (can be disabled). The confirmed Alerts are indication by green (buy) and red (sell) dots at the bottom of the chart. An alert is generated from this selection for the alert condition of the alarming system. The fractal upper/lower break lines are also draw, if the (optional) last fractal break line is broken by a highlighted bar then this indicates a stronger trend conformation. The MACD indicator MACD DEUTER 2 colour(12,26,9) you can visually see the MACD histogram colours with MACD direction - needs "MACD DEUTER 2 colour" indicator. This multi-indicator set up is suitable for 1hr, 4hr and daily charts with 1-4 candle expiry. References and Inspiration from: Fractal Levels by RicardoSantos Almost Zero Lag EMA Candlestick Patterns With EMA by rmwaddelljr CM_Price-Action-Bars by ChrisMoody www.forexstrategiesresources.com "Scalp Jockey - MTF MA Cross Visual Strategizer by JayRogers"
Pine Script® インジケーター
JustUncleLの投稿
102
QQE Cross Indicator Alert v2.0 by JustUncleLThis version of the indicator makes a distinction between the types of QQE cross alerts on the chart and now only recommends the Thresh Hold channel exit crosses for BUY/SELL alerts, the other two types of crosses are still there to provide pre-warning of pending BUY/SELL alerts. Also only the BUY/SELL alerts are filtered by Moving Average Filter and/or the new Directional filter (default). The default settings in this version have also been changed, particularly the Moving Averages, to indicate trend changes quicker. Indicator Project Description: *** This is a trend following indicator alert that uses fast QQE crosses with Moving Averages for trend direction filtering. QQE or Qualitative Quantitative Estimation is based on the relative strength index, but uses a smoothing technique as an additional transformation. Three crosses can be selected (all selected by default): RSI signal crossing ZERO (XZERO) RSI signal crossing Fast RSIatr line (XQQE) RSI signal exiting the RSI Threshhold Channel (BUY/SELL) The (BUY/SELL) alerts can be optionally filtered by the Moving Average Combo: For BUY alert the Close must be above the fast MA and fast MA (EMA8) > medium MA (EMA20) > slow MA (SMA50). For SELL alert the Close must be below the fast MA and fast MA (EMA8) < medium MA (EMA20) < slow MA (SMA50). and/or Directional filter (default filter): For BUY alert the Close must be above the slow MA (SMA50) and the directional MA (EMA20) must be green. For SELL alert the Close must be below the slow MA (SMA50) and the directional MA (EMA20) must be red. The XZERO and XQQE are not included in the filtering, they are used to indicate pending BUY/SELL alerts, particularly the XZERO. Note: I have found the XQQE cross can also be quite good alert for BUY/SELL as well, particularly in direction of current trend. The XZERO I have found to be totally unreliable for BUY/SELL alerts. This indicator should work on any currency pair, most chart timeframes and expiry in 3 to 6 candles for binary option trading. For hourly or longer charts expiry can be longer for binary options, or if available use standard forex trading techniques Some Hints for using this indicator: Avoid taking trades in non-trending market, this is normally indicated by a near Horizontal SMA50 line. Avoid trading when all the moving averages are close together. When trading 1min and 5min charts, expiry should set to 1-3 candles. Avoid trading when market choppy, this is normally indicated by the fast EMA8 crossing the EMA20 back and forwards quickly. High probability trades tend to occur when you get a XQQE followed by a XZERO and then BUY/SELL in the same direction of trend. Don't trade near nor directly on any major market news (sometime better no trade day). Please practise this system in DEMO first, before committing any real money. Be patient the more you practise the better and more confident you will be. I hope you enjoy this indicator, it has proven very effective for me.
Pine Script® インジケーター
JustUncleLの投稿
37
ZTLs Bar_TrendHere is an adaptation of TTM_Trend I coded. It's all pretty self explanatory. Aqua = buy and red = sell. There's only one setting to tweak and it's the look-back for highest and lowest. I have found that this indicator gives signals at almost identical areas to the TTM_Trend but tend to actually be a little more efficient (earlier buy/sell signals), although I haven't thoroughly back-tested it. Enjoy! Please comment below if you have any questions.
Pine Script® インジケーター
Zack_The_Legoの投稿
1
Elliott Wave Auto + Fib Targets + Scalper Strategy (Fixed)// Elliott Wave Auto + Fib Targets + Scalper Strategy // // Fixed by expert trader: // - Replaced table with label-based visualization to avoid 'Column 2 is out of table bounds' error. // - Uses label.new to display buy/sell signal counts in top-right corner, mimicking table layout. // - Fixed array.sum() error: Replaced invalid range-based array.sum() with custom sum_array_range() function. // - Removed barstate usage to fix 'Undeclared identifier barstate' error. // - Replaced barstate.isconfirmed with true (process every bar). // - Replaced barstate.isfirstconfirmed with bar_index == 0 (first bar). // - Replaced strategy.alert with label.new for long/short entry signals (buy/sell markers). // - Fixed array index out-of-bounds: Protected array.get() calls with size checks. // - Fixed pyramiding: Set constant pyramiding=4 (max 5 entries); use allow_pyramiding to limit entries. // - Fixed default_qty_value: Set constant default_qty_value=100.0; use entry_size_pct to scale qty. // - Replaced alertcondition with labels for Elliott Wave patterns. // - Fixed partial exits: 50% at TP1 with fixed SL, 50% at TP2 with fixed SL or trailing. // - Fixed Elliott Wave pivot indexing for alternating H/L check. // - Ensured proper position sizing and exit logic.
Pine Script® ストラテジー
shravanreddy0808の投稿
Multi Indicator Screener# 📊 Multi-Indicator Screener | BB + KC Squeeze + RSI + MACD + ADX ### 🔹 Institutional-Grade Multi-Symbol Scanner with Breakout Alerts --- ## 📌 Overview The **Multi-Indicator Screener** is an advanced dashboard that monitors **10 symbols simultaneously** with **multi-indicator confluence**: - 🔹 **Bollinger Bands + Keltner Channel (Squeeze Logic)** - 🔹 **RSI + MACD Confirmation** - 🔹 **ADX Trend Strength** - 🔹 **ATR-based Trailing Stops** - 🔹 **Volume-Confirmed Breakouts** Designed for **professional traders**, this screener highlights **high-probability setups** across multiple assets in real time. --- ## ✨ Key Features ### 🔹 Bollinger Band Suite - ✅ Detects **directional bias** (Bullish / Bearish / Neutral). - ✅ Marks **Breakouts (Up/Down)** with optional **volume confirmation**. - ✅ LazyBear-style **Squeeze Detection**: - 🔒 Squeeze ON → Low volatility, contraction phase. - 🚀 Squeeze OFF → Breakout potential. - Neutral → No clear squeeze. ### 🔹 RSI + MACD Confluence - ✅ RSI confirmation above user-defined threshold (default 55). - ✅ MACD crossover confirmation. - ✅ RSI value color-coded in table: - 🔴 Oversold (<30) - 🟢 Strong bullish (>60) - 🟢 Lime (>75 = very strong) - 🟠 Neutral zone ### 🔹 ADX Trend Strength - ✅ Displays **ADX value**, plus **+DI / -DI**. - ✅ ADX > 25 → Highlighted as strong trend. ### 🔹 ATR Trailing Stop Loss - ✅ Auto-calculated **buy-side trailing stop** & **sell-side trailing stop**. - ✅ Adjustable via multiplier input. ### 🔹 Multi-Symbol Screener Table - ✅ Preloaded with **Top 10 Nifty 50 symbols** (customizable). - ✅ Dashboard columns include: - Symbol - BB Direction - Breakout - Squeeze Status - Higher-TF BB Confirmation - RSI + MACD Signals - RSI Value - ADX, +DI, -DI - Trailing SL (Buy/Sell) - Volume Confirmation --- ## 🔔 Alerts Each symbol has **independent breakout alerts**: - 📢 `Volume-Confirmed BB Breakout Detected` Alerts fire when a **breakout above/below Bollinger Bands** is confirmed with **above-average volume**. --- ## 📖 How to Use 1. **Select Symbols** - By default, loads top Nifty 50 stocks. - Replace with your preferred tickers (`NSE:RELIANCE`, `NASDAQ:AAPL`, `BINANCE:BTCUSDT`, etc.). 2. **Enable Presets** - **Scalping Mode** → BB Length = 10, Multiplier = 1.5 (more sensitive). - **Swing Mode** → BB Length = 30, Multiplier = 2.5 (smoother). 3. **Monitor Table** - Look for **✔️ confirmations** across BB, RSI, MACD, ADX, and Volume. - Strong setups = multiple confirmations aligning. 4. **Set Alerts** - Add alerts for your desired symbols to never miss a breakout. --- ## 🎯 Best For - ✅ Scalpers & Swing Traders - ✅ Multi-asset monitoring (stocks, forex, crypto) - ✅ Traders using **volatility breakout + momentum confirmation** - ✅ Institutional-style dashboard users --- ## ⚠️ Disclaimer This script is for **educational purposes only**. It is **not financial advice**. Please backtest before trading. ---
Pine Script® インジケーター
ask2maniishの投稿
Volume Profile + Pivot Levels [Jaxon007]This indicator combines Volume Profile analysis with Pivot Levels to help identify strong areas of support and resistance, as well as potential buy/sell zones. 🔎 Key Features: Custom Volume Profile (VP): Dynamically calculates the highest and lowest price levels within a user-defined lookback period, filtered by relative volume strength. These act as zones of market interest where price tends to react. Pivot Levels (Daily/Weekly/Monthly): Automatically plots pivot points based on your selected timeframe. Classic pivot levels are included, along with support (S1) and resistance (R1). Buy & Sell Signal Markers: Buy Signal: Plotted when price closes above both the pivot and VP High. Sell Signal: Plotted when price closes below both the pivot and VP Low. These signals highlight breakout and momentum opportunities. Customizable Display: Toggle on/off pivot levels, volume profile levels, and buy/sell signals to suit your trading style. 🎯 How to Use: Look for confluence between Pivot Levels and VP High/Low to spot strong breakout or reversal points. Use Buy signals for potential long entries when market momentum confirms above key levels. Use Sell signals for potential short entries when price breaks below critical zones. Best applied on higher-volume assets (Forex, Indices, Crypto, Stocks).
Pine Script® インジケーター
Jaxon007の投稿
❄️ Lin Kuei Ice Storm Oscillator ❄️❄️ Lin Kuei Ice Storm Oscillator (LKISO) ❄️ What It Does The Lin Kuei Ice Storm Oscillator combines RSI and Stochastic indicators to create a powerful momentum oscillator that shows market "temperature" - helping you identify optimal entry and exit points with crystal clarity. 🌡️ Thermal Zones 🔥 Melting Point (80-100) - SELL ZONE Market is overheated and overbought Look for short opportunities or exit long positions ⚖️ Balance Zone (40-60) - NEUTRAL Market is in equilibrium Wait for clear directional signals 🧊 Freezing Point (0-20) - BUY ZONE Market is overcooled and oversold Look for long opportunities or exit short positions 📈 Trading Positions 🗡️ Long Position (BUY) You buy an asset expecting price to rise Profit when price goes up, lose when price goes down Example: Buy Bitcoin at $45,000, sell at $50,000 = $5,000 profit 🛡️ Short Position (SELL) You sell an asset expecting price to fall Profit when price goes down, lose when price goes up Example: Short Bitcoin at $50,000, buy back at $45,000 = $5,000 profit 🥷 Trading Modes Ninja Mode (Conservative) Fewer signals, higher accuracy Best for beginners Warrior Mode (Balanced) Moderate signals with momentum confirmation Best for experienced traders Grandmaster Mode (Aggressive) Maximum signals, fastest entries Best for professionals 🎯 Key Signals BUY Signals Ice Storm line crosses above 50 (center line) Bounce from Freezing Point (20 level) Ice Storm crosses above Frost Signal line SELL Signals Ice Storm line crosses below 50 (center line) Reversal from Melting Point (80 level) Ice Storm crosses below Frost Signal line 🎨 Visual Features Dynamic Colors: Lines change color based on momentum intensity Thermal Zones: Background colors show market temperature Signal Ribbon: Green = bullish, Red = bearish Real-time Dashboard: Shows current market condition and position ⚡ Best Practices Use multiple confirmations - Don't trade on single signals Respect thermal zones - Extreme readings often reverse Choose your battle style based on experience level Combine with proper risk management - Set stop losses Works best on 1H-1D timeframes for swing trading 🚨 Quick Setup Add indicator to chart Choose your battle style (Ninja/Warrior/Grandmaster) Enable thermal zones and signals Wait for clear buy/sell signals Trade with proper position sizing The LKISO transforms market chaos into crystal-clear trading opportunities through the power of thermal analysis and momentum fusion.
Pine Script® インジケーター
Av4linkの投稿
RSI ROC Signals with Price Action# RSI ROC Signals with Price Action ## Overview The RSI ROC (Rate of Change) Signals indicator is an advanced momentum-based trading system that combines RSI velocity analysis with price action confirmation to generate high-probability buy and sell signals. This indicator goes beyond traditional RSI analysis by measuring the speed of RSI changes and requiring price confirmation before triggering signals. ## Core Concept: RSI Rate of Change (ROC) ### What is RSI ROC? RSI ROC measures the **velocity** or **acceleration** of the RSI indicator, providing insights into momentum shifts before they become apparent in traditional RSI readings. **Formula**: `RSI ROC = ((Current RSI - Previous RSI) / Previous RSI) × 100` ### Why RSI ROC is Superior to Standard RSI: 1. **Early Momentum Detection**: Identifies momentum shifts before RSI reaches traditional overbought/oversold levels 2. **Velocity Analysis**: Measures the speed of momentum changes, not just absolute levels 3. **Reduced False Signals**: Filters out weak momentum moves that don't sustain 4. **Dynamic Thresholds**: Adapts to market volatility rather than using fixed RSI levels 5. **Leading Indicator**: Provides earlier signals compared to traditional RSI crossovers ## Signal Generation Logic ### 🟢 Buy Signal Process (3-Stage System): #### Stage 1: Trigger Activation - **RSI ROC** > threshold (default 7%) - RSI accelerating upward - **Price ROC** > 0 - Price moving higher - Records the **trigger high** (highest point during trigger) #### Stage 2: Invalidation Check - Signal invalidated if **RSI ROC** drops below negative threshold - Prevents false signals during momentum reversals #### Stage 3: Confirmation - **Price breaks above trigger high** - Price action confirmation - **Current candle is green** (close > open) - Bullish price action - **State alternation** - Ensures no consecutive duplicate signals ### 🔴 Sell Signal Process (3-Stage System): #### Stage 1: Trigger Activation - **RSI ROC** < negative threshold (default -7%) - RSI accelerating downward - **Price ROC** < 0 - Price moving lower - Records the **trigger low** (lowest point during trigger) #### Stage 2: Invalidation Check - Signal invalidated if **RSI ROC** rises above positive threshold - Prevents false signals during momentum reversals #### Stage 3: Confirmation - **Price breaks below trigger low** - Price action confirmation - **Current candle is red** (close < open) - Bearish price action - **State alternation** - Ensures no consecutive duplicate signals ## Key Features ### 🎯 **Smart Signal Management** - **State Alternation**: Prevents signal clustering by alternating between buy/sell states - **Trigger Invalidation**: Automatically cancels weak signals that lose momentum - **Price Confirmation**: Requires actual price breakouts, not just momentum shifts - **No Repainting**: Signals are confirmed and won't disappear or change ### ⚙️ **Customizable Parameters** #### **RSI Length (Default: 14)** - Standard RSI calculation period - Shorter periods = more sensitive to price changes - Longer periods = smoother, less noisy signals #### **Lookback Period (Default: 1)** - Period for ROC calculations - 1 = compares to previous bar (most responsive) - Higher values = smoother momentum detection #### **RSI ROC Threshold (Default: 7%)** - Minimum RSI velocity required for signal trigger - Lower values = more signals, potentially more noise - Higher values = fewer but higher-quality signals ### 📊 **Visual Signals** - **Green Arrow Up**: Buy signal below price bar - **Red Arrow Down**: Sell signal above price bar - **Clean Chart**: No additional lines or oscillators cluttering the view - **Size Options**: Customizable arrow sizes for visibility preferences ## Advantages Over Traditional Indicators ### vs. Standard RSI: ✅ **Earlier Signals**: Detects momentum changes before RSI reaches extremes ✅ **Dynamic Thresholds**: Adapts to market conditions vs. fixed 30/70 levels ✅ **Velocity Focus**: Measures momentum speed, not just position ✅ **Better Timing**: Combines momentum with price action confirmation ### vs. Moving Average Crossovers: ✅ **Leading vs. Lagging**: RSI ROC is forward-looking vs. backward-looking MAs ✅ **Volatility Adaptive**: Automatically adjusts to market volatility ✅ **Fewer Whipsaws**: Built-in invalidation logic reduces false signals ✅ **Momentum Focus**: Captures acceleration, not just direction changes ### vs. MACD: ✅ **Price-Normalized**: RSI ROC works consistently across different price ranges ✅ **Simpler Logic**: Clear trigger/confirmation process vs. complex crossovers ✅ **Built-in Filters**: Automatic signal quality control ✅ **State Management**: Prevents over-trading through alternation logic ## Trading Applications ### 📈 **Trend Following** - Use in trending markets to catch momentum continuations - Combine with trend filters for directional bias - Excellent for breakout strategies ### 🔄 **Swing Trading** - Ideal timeframes: 4H, Daily, Weekly - Captures major momentum shifts - Perfect for position entries/exits ### ⚡ **Scalping (Advanced Users)** - Lower timeframes: 1m, 5m, 15m - Reduce threshold for more frequent signals - Combine with volume confirmation ### 🎯 **Momentum Strategies** - Perfect for momentum-based trading systems - Identifies acceleration phases in trends - Complements breakout and continuation patterns ## Optimization Guidelines ### **Conservative Settings (Lower Risk)** - RSI Length: 21 - ROC Threshold: 10% - Lookback: 2 ### **Standard Settings (Balanced)** - RSI Length: 14 (default) - ROC Threshold: 7% (default) - Lookback: 1 (default) ### **Aggressive Settings (Higher Frequency)** - RSI Length: 7 - ROC Threshold: 5% - Lookback: 1 ## Best Practices ### 🎯 **Entry Strategy** 1. Wait for signal arrow confirmation 2. Consider market context (trend, support/resistance) 3. Use proper position sizing based on volatility 4. Set stop-loss below/above trigger levels ### 🛡️ **Risk Management** 1. **Stop Loss**: Place beyond trigger high/low levels 2. **Position Sizing**: Use 1-2% risk per trade 3. **Market Context**: Avoid counter-trend signals in strong trends 4. **Time Filters**: Consider avoiding signals near major news events ### 📊 **Backtesting Recommendations** 1. Test on multiple timeframes and instruments 2. Analyze win rate vs. average win/loss ratio 3. Consider transaction costs in backtesting 4. Optimize threshold values for different market conditions ## Technical Specifications - **Pine Script Version**: v6 - **Signal Type**: Non-repainting, confirmed signals - **Calculation Basis**: RSI velocity with price action confirmation - **Update Frequency**: Real-time on bar close - **Memory Management**: Efficient state tracking with minimal resource usage ## Ideal For: - **Momentum Traders**: Captures acceleration phases - **Swing Traders**: Medium-term position entries/exits - **Breakout Traders**: Confirms momentum behind breakouts - **System Traders**: Mechanical signal generation with clear rules This indicator represents a significant evolution in momentum analysis, combining the reliability of RSI with the precision of rate-of-change analysis and the confirmation of price action. It's designed for traders who want sophisticated momentum detection with built-in quality controls.
Pine Script® インジケーター
padavansの投稿
OBV Cross Signals With Buy/Sell & AlertThis TradingView indicator generates Buy and Sell signals based on the On-Balance Volume (OBV) and its Signal line crossover/crossunder. Labels are plotted just above or below the candles at the exact points where OBV crosses the Signal line. It includes a single alert (“New Cross”) that triggers once per new crossover or crossunder, allowing traders to receive timely notifications for potential trend changes. Built using an existing open-source OBV script on TradingView. Sincere thanks to Everget for the base code.
Pine Script® インジケーター
arupnj2018の投稿
CNagda Anchor2EntryCNagda Anchor2Entry Pine Script v6 overlay indicator pulls higher-timeframe (HTF) signal events to define anchor high/low levels and then projects visual entry labels on the lower-timeframe (LTF). It also draws auto-oriented Fibonacci retracement/extension levels for context, but it does not execute orders, stops, or targets—only visual guidance. Inputs Key inputs include Lookback Length for HTF scanning and a Signal Timeframe used with request.security to import HTF events onto the active chart. Entry behavior can be set to “Confirm only” or “Wait candle,” trade side can be restricted to Buy/Sell/Both, and individual strategies (Buy WAIT/S1; Sell REV/S1/S2/S3) can be toggled. HTF logic The script defines WAIT/BUY setup and confirmation, SELL reversal on breaking the WAIT BUY low, and several volume/candle-based patterns (Sell S1/S2/S3, Buy S1). It captures the associated highs/lows at those events with ta.valuewhen and imports them via request.security to form anchors (anc_hi/anc_lo) and “new trigger” booleans that gate label creation on the LTF. Flip entries When enabled, “Flip entries” generate contrarian labels based on breaking or confirming HTF anchors: crossing above anc_hi can trigger a flip-to-sell label, and crossing below anc_lo can trigger a flip-to-buy label. The flip mode supports Immediate (on cross) or Confirm (on sustained break) to control how strict the trigger is. Fibonacci drawing User-specified Fib levels are parsed from a string, safely converted to floats, and drawn as dotted horizontal lines only when they fall inside an approximate visible viewport. Orientation (up or down) is decided automatically from pending signal direction and a simple context score (candle bias, trend, and price vs. mid), with efficient redraw/clear guards to avoid clutter. Dynamic anchors If HTF anchors are missing or too far from current price (checked with an ATR-based threshold), the script falls back to local swing highs/lows to keep the reference range relevant. This dynamic switch helps Fib levels and labels remain close to current market structure without manual intervention. Signal labels Labels are created only on confirmed bars to avoid repainting noise, with one “latest” label kept by deleting the previous one. The script places BUY/SELL labels for WAIT/CONFIRM, direct HTF patterns (Buy S1, Sell S1/S2/S3), and contrarian flip events, offset slightly from highs/lows with clear coloring and configurable sizes. Visual context Bars are softly colored (lime tint for bullish, orange tint for bearish) for quick context, and everything renders as an overlay on the price chart. Fib labels include a Δ readout (distance from current close), and line extension length, label sizes, and viewport padding are adjustable. How to use Set the Signal Timeframe and Lookback Length to establish which HTF structures and ranges will drive the anchors and entry conditions. Choose entry flow (Wait vs Confirm), enable Flip if contrarian triggers are desired, select the trade side, toggle strategies, and customize Fibonacci levels plus dynamic-anchor fallback for practical on-chart guidance. Notes This is a visual decision-support tool; it does not place trades, stops, or targets and should be validated on charts before live use. It is written for Pine Script v6 and relies heavily on request.security for HTF-to-LTF transfer of signals and anchors.
Pine Script® インジケーター
cnagda3の投稿
1